Canon Staple Finisher-AA1 Service Manual page 15

Item
Stacking capacity
Stack tray
(without folding
sheets)
Mixed stacking ca- Escape tray
pacity (without
folding sheets)
Stack tray
- Paper size regulations:
Small size (feed length: 220 mm or less): A4, B5, LTR, EXEC, 16K, STMTR, A5R
Large size (feed length: more than 220 mm): A3, A4R, B4, B5R, 11 × 17, LGL, LTRR, 8K
Specifications
[Non sort/shift sort mode]
- Plain paper
Small size: Height 423 mm or less (equivalent to 3,000 sheets)
(when saddle is used: Height 216 mm or less (equivalent to
1,500 sheets))
Large size: Height 216 mm or less (equivalent to 1,500 sheets)
- Coated paper
Small size: Height 216 mm or less (equivalent to 1,500 sheets)
Large size: Height 108 mm or less (equivalent to 750 sheets)
[Staple mode/staple-free binding mode]
- Plain paper
Small size: Height 423 mm or less, or 200 sets or less (when
saddle is used: Height 216 mm or less)
Large size: Height 216 mm or less, or 100 sets or less
- Coated paper
Small size: Height 216 mm or less, or 100 sets or less
Large size: Height 108 mm or less, or 50 sets or less
[Mixed size]
Plain paper combination of A4, B5, and LTR only: Height 47 mm
± 3 mm or less
Combinations of other paper sizes: Height 24 mm ± 3 mm or less
[Size mixing]
Plain paper combination of A4, B5, and LTR only : Height
216mm±3mm
Combinations of other paper sizes: Height 108mm ± 3mm
[Stapling mixing]
- Plain paper
Small size: Height 423 mm -/+ 3 mm or less, or 200 sets or less
Large size: Height 216 mm ± 3 mm or less, or 100 sets or less
- Coated paper
Small size: Height 216 mm ± 3 mm or less, or 100 sets or less
Large size: Height 108 mm ± 3mm or less, or 50 sets or less
[Mode mixing]
Plain paper combination of A4, B5, and LTR only: Height 423
mm ± 3 mm
Combinations of other paper sizes: Height 216 mm ± 3 mm or
less
7
1. Product Overview
Remarks
- The stacking capaci-
ties are estimates when
converting weight to
number of 81.4 g/m2
sheets.
- The stacking capacity
for paper weighing 59 g/
m2 or less is for up to
the large size height,
and the alignment ac-
curacy for 2-sided print
is not specified.
- Transparency, post
card, label and tracing
paper: 10 sheets or less
- Large size condition is
applied after a sheet of
paper of large size is
delivered.
- The stacking capaci-
ties are estimates when
converting weight to
number of 81.4 g/m2
sheets.
- The stacking capacity
for paper weighing 59 g/
m2 or less is for up to
the large size height
- The stacking capaci-
ties are estimates when
converting weight to
number of 81.4 g/m2
sheets.
- Stacking capacity is
not guaranteed.
- When the plain paper
and coated paper are
stacked, follows the
specifications of the
coated paper.
- The mixed stacking of
the small size paper
and 432 mm or more
length paper is not pos-
sible.
- Stacking on upper/
lower escape tray is not
possible for stapling
mixing and mode mix-
ing.