Canon Staple Finisher-AA1 Service Manual page 118

■ Procedure
1. Turn Staple Dive Belt [2] moving Staple Unit [3] in
contact with the rear end, to move Staple-free
Binding Unit [1] for rear side.
NOTE:
In the case of moving Stapler Unit, it is better to move
Alignment Plates for center to move Staple Unit smoothly.
[2]
2. Remove the Staple-free Binding Unit [1].
• 5 Screws [2]
• 1 Connector [3]
[1]
[1]
[3]
5x
1x
[1]
3. Process the harness [1].
• 1 Connector [2]
• 2 Wire Saddles [3]
• 1 Edge Saddle [4]
• 1 Screw [5]
[5]
1x
[2]
3x
[3]
1x
110
4. Parts Replacement and Cleaning
[2]
[2]
[3]
[2]
[1]
[4]
[3]
[2]
[2]