Canon Staple Finisher-AA1 Service Manual page 79

Jam type
Inlet sensor delay
Delivery sensor delay
Buffer sensor delay
Escape delivery sensor delay
Saddle delivery sensor delay
Saddle inlet sensor delay
Buffer pass inlet sensor delay
Jams
Buffer pass outlet sensor delay
Jams
Inlet sensor stationary
Delivery sensor stationary
Buffer sensor stationary
Escape delivery sensor stationary PS111
Saddle delivery sensor stationary PS203
Saddle inlet sensor stationary
Buffer pass inlet sensor stationary
Jams
Buffer pass exit sensor stationary
Jams
Early timing jam
Buffer pass early timing jam
Finisher front cover open jam
Buffer pass upper unit open jam PI203
Finisher stapler staple jam
Saddle stitcher staple jam
Inlet sensor power-on jam
Delivery sensor power-on jam
Buffer sensor power-on jam
Escape delivery sensor power-on
jam
Saddle processing tray paper
sensor power-on jam
Saddle delivery sensor power-on
jam
Saddle inlet sensor power-on jam PS201
Buffer pass inlet sensor power-on
jam
Buffer pass exit sensor power-on
jam
Sensor
PS101 When the inlet sensor (PS101) does not detect the paper even when the paper is fed
the specified distance after receiving a paper delivery signal from the host machine.
PS102 When the delivery sensor (PS102) does not detect the paper even when the paper
is fed the specified distance after the inlet sensor (PS101) detects the paper.
PS103 When the buffer sensor (PS103) does not detect the paper even when the paper is
fed the specified distance after the paper is switched back.
PS111 When the escape delivery sensor (PS111) does not detect the paper even when the
paper is fed the specified distance after the paper reaches escape feed roller 1.
PS203 When the saddle delivery sensor (PS203) does not detect paper even when the
specified time elapses after starting to push the paper.
PS201 When the saddle inlet sensor (PS201) does not detect the paper even when the paper
is fed the specified distance after the paper is switched back.
PI201 When the inlet sensor (PI201) does not detect the paper even when the paper is fed
the specified distance after receiving a paper delivery signal from the host machine.
PI202 When the exit sensor (PI202) does not detect the paper even when the paper is fed
the specified distance after the inlet sensor (PI201) detects the paper.
PS101 When the paper does not pass through the inlet sensor (PS101) even when the paper
is fed the specified distance after the sensor detects the paper.
PS102 When the paper does not pass through the delivery sensor (PS102) even when the
paper is fed the specified distance after the sensor detects the paper.
PS103 When the paper does not pass through the buffer sensor (PS103) even when the
paper is fed the specified distance after the sensor detects the paper.
When the paper does not pass through the escape delivery sensor (PS111) even
when the paper is fed the specified distance after the sensor detects the paper.
When the paper does not pass through the saddle delivery sensor (PS203) even when
the paper is fed the specified distance after the sensor detects the paper.
PS201 When the paper does not pass through the saddle inlet sensor (PS201) even when
the paper is fed the specified distance after the sensor detects the paper.
PI201 When the paper does not pass through the inlet sensor (PI201) even when the paper
is fed the specified distance after the sensor detects the paper.
PI202 When the paper does not pass through the exit sensor (PI202) even when the paper
is fed the specified distance after the sensor detects the paper.
- When the deliver signal from the host machine is detected for a time duration shorter
than the specified duration notified in advance.
- When the Inlet Sensor (PI201) detect the paper before feed speed is changed.
PS104, When it is detected that the front cover has been opened during operation.
SW101
When it is detected that the upper unit has been opened during operation.
PS125 When the staple HP sensor (PS125) cannot detect the home position even when the
specified time elapses after the sensor leaves the home position when stapling is
executed.
PS215 During stapling, when the saddle stitcher HP sensor (PS215) does not turn on even
when the specified time elapses after the saddle stitcher motor (M208) begins driving
and when the saddle stitcher motor (M208) is driven in reverse the sensor turns on.
PS101 When the inlet sensor (PS101) detects paper during power-on.
PS102 When the delivery sensor (PS102) detects paper during power-on.
PS103 When the buffer sensor (PS103) detects paper during power-on.
PS111 When the escape delivery sensor (PS111) detects paper during power-on.
PS202 When the saddle processing tray paper sensor (PS202) detects paper during power-
on.
PS203 When the saddle delivery sensor (PS203) detects paper during power-on.
When the saddle inlet sensor (PS201) detects paper during power-on.
PI201 When the inlet sensor (PI201) detects paper during power-on.
PI202 When the exit sensor (PI202) detects paper during power-on.
Jam description
71
2. Technical Explanation