Canon Staple Finisher-AA1 Service Manual page 80

Jam type
Staple-free binding error jam (sta-
ple-free binding motor clock sen-
sor error)
Staple-free binding error jam (sta-
ple-free binding HP sensor error)
Staple-free binding error jam (sta-
ple-free binding motor error)
Staple-free binding error jam
(binding time-out)
Staple-free binding error jam
(post-bind return operation time-
out)
Error avoidance jam
Paper feed cancellation jam
Manual stack insertion jam
Sequence jam
Sensor
PS130 When the staple-free binding motor clock sensor (PS130) cannot detect the encoder
rotation within the specified time after the staple-free binding motor (M116) begins
driving.
PS129 When the staple-free binding HP sensor (PS129) does not turn on even when the
specified time elapses after the staple-free binding motor (M116) begins driving.
- When the staple-free binding motor clock sensor (PS130) cannot detect the encoder
rotation within the specified time after the staple-free binding motor (M116) begins
driving and the staple-free binding HP sensor (PS129) turn on even when the speci-
fied time elapses.
- When the staple-free binding motor clock sensor (PS130) cannot detect a decrease
in encoder rotation (load occurrence as a result of pinching paper) within the specified
time after the staple-free binding motor (M116) begins driving.
- In the return operation after staple-free binding, when the staple-free binding HP sen-
sor (PS129) does not turn off within the specified time after the staple-free binding
motor (M116) begins driving.
- When any of the following errors is detected during feeding operation.
• Paper end assist motor error (E514)
• Front alignment motor error (E530)
• Stapler shift motor error (E532)
• Staple-free binding motor error (E533)
• Swing guide motor error (E535)
• Rear alignment motor error (E537)
• Stack tray shift motor error (E540)
• escape delivery shift motor error/ flapper motor error / stack delivery/paddle mo-
tor error (E553)
• Safety switch ON error (E554)
• Saddle feed/paddle motor error (E577)
• Paper end pushing guide motor error (E57B)
• Return roller lift motor error (E578)
• Tray auxiliary guide motor error (E583)
• Saddle paper end stopper motor error (E5F0)
• Saddle delivery motor error (E5F1)
• Saddle alignment motor error (E5F3)
• Saddle paper pushing plate/folding motor error (E5F6)
• Saddle switching lever motor error (E5F8)
• Saddle gripper motor error (E5FA)
- When a paper feed cancellation instruction from the host machine is received for
paper delivered according to a paper reception notification signal.
- When a paper stack is inserted in the manual staple slit while the stapler unit is mov-
ing. This is not detected when the stapler unit is moving to the staple replacement
position.
- When the same status does not change even when 1 minute elapses or when a job
is submitted when in service mode.
Jam description
72
2. Technical Explanation