Canon Staple Finisher-AA1 Service Manual page 179

■ Adjusting the Saddle Stitch Position
<Use case>
• When the saddle stitch position in the saddle stitch mode.
<Procedure of adjustment>
CAUTION:
In the case performing this adjustment, record user mode setting value before the adjustment. Input 0 for setting value and
start the adjustment.
• Adjustment/Maintenance > Adjust Action > Change Fold/Stitch Position
NOTE:
After the setting value is changed, write the changed value in the service label.
B
Feed Direction
B
Feed Direction
Stapling Position
B
Stapling Position
B
171
5. Adjustment