Buffer Operation - Canon Staple Finisher-AA1 Service Manual

• When the paper width is less than 290 mm or more than 297 mm and paper length is less than 182 mm or more than 431.8
mm
- Front shift
- Rear shift

Buffer Operation

The paper fed by the host machine while the processing tray unit is performing shift operation or staple operation is stored in the
buffer path unit and fed to the processing tray unit as a paper stack. This allows paper to be fed without sacrificing print processing
speed. In addition, the buffer operation is not performed at the staple-free binding mode.
Buffer operation condition
• Weight of paper that can be buffered: 60 to 105 g/m2
• Paper size
paper length: 182 mm to 220 mm
paper width: 216.1mm to 297mm
• Number of sheets that can be buffered: 1 to 3 sheets (Up to 2 sheets can be stacked in the buffer. 1 or 2 sheets for 2-sided
print)
condition to limit buffer operation
• When chose bond paper
• When the staple-free binding operatio
• When the sort mood
Escape Delivery Roller
25mm
Paper
Escape Delivery Roller
25mm
Paper
37
2. Technical Explanation