Canon Staple Finisher-AA1 Service Manual page 158

3. The alignment plate moves to position of the A4 width.
4. Set the A4 paper on the processing tray.
5. Enter the setting value, and then press OK key.
6. Check the adjustment movement of the alignment plate.
7. Repeat steps 5 and 6 and adjust alignment width.
8. After completion of the adjustment, remove paper on the processing tray.
■ Adjusting Center Alignment Standard Position
<Use case>
• When the standard position for the center alignment is misaligned.
• When misalignment occurs in front/rear direction.
<Procedure of adjustment>
CAUTION:
This adjustment influences alignment operation and staple position.Adjust the alignment width with
Alignment Position" on page
Feed Direction
149.
Feed Direction
150
5. Adjustment
"Adjusting Stacker