Canon Staple Finisher-AA1 Service Manual page 159

1. Adjust the center alignment by the following service modes.
• SORTER > ADJUST > CENT-ALG
Adjustment range: -50 to 50 (Unit: 0.1mm)
As the value is incremented by 1, the standard position for the center alignment moves by 0.1 mm.
+: Toward rear
-: Toward front
■ Right Angle Adjustment of Alignment Plate
<Use case>
• When remove or replace the alignment plate.
• When the paper alignment position is displaced.
<Procedure of adjustment>
Feed Direction
Feed Direction
151
Alignment Plate
+
-
+
-
Alignment Plate
Feed Direction
5. Adjustment