Table of Contents
Advertisement
Making Checks After
Completion of Installation
Work
Disposal Parts Check
Following disposal parts are remained after completion of the
installation work.
[1]
Reverse Trailing Edge Guide (In the case
1 pc.
it was installed in the Host Machine.)
[2]
Inner Connector Cover
1 pc.
[3]
Remaining Tray Setting Labels
1 pc.
[4]
Remaining Language Jam label (Booklet
1 pc.
Finisher only.)
[4]
Remaining Caution Language Label
1 pc.
(Booklet Finisher only.)
Operation Check
1.
Turn ON the main power of the Host Machine.
2.
7. Installation
3.
4.
If a message prompting the user to update the
version appears, press [Update] to automatically
update the version of the Finisher.
NOTE:
If [Skip] is selected, a message prompting the user to
update the version will appear every time the Host
Machine is started. In the service mode (Level 2) shown
below, it is possible to set not to display the message.
• (Level2) COPIER > OPTION > FNC-SW > VER-
CHNG
5.
Check the operation such as paper feed and stapling
to make sure that problems such as a jam or
malfunction do not occur.
Page 213
- Quick Links:
- Finisher
- Specifications
Hide quick links:
Advertisement
Table of Contents
