Canon Staple Finisher-AA1 Service Manual page 172

■ Adjusting the Fold Placement
<Use case>
• When misalignment occurs in feed direction.
<Procedure of adjustment>
CAUTION:
In the case performing this adjustment, record user mode setting value before the adjustment. Input 0 for setting value and
start the adjustment.
• Adjustment/Maintenance > Adjust Action > Adjust Saddle Stitch Fold Position
• Adjustment/Maintenance > Adjust Action > Adjust Fold Position
NOTE:
After the setting value is changed, write the changed value in the service label.
1. Find the displaced paper in the paper stack.
• In the case the last paper is displaced
Change the setting of the paddle operation when stacking paper by the following service mode.
SORTER > OPTION > SDL-ALG = 1
NOTE:
In this mode, the paddle operation is changed from 1 rotation to 2 rotations and paper is fed more for feeding direction.
• In the case other than the last paper is displaced
Perform step 2.
B
Feed Direction
B
Feed Direction
Folding Position
B
Folding Position
B
164
5. Adjustment