Switches; Removing The Front Cover Switch (Sw101); Removing The Swing Guide Safety Switch (Sw102) - Canon Staple Finisher-AA1 Service Manual

Switches

Removing the Front Cover
Switch (SW101)
■ Preparation
1. Remove the front cover.
" Removing the Front Cover" on page 94
2. Remove the front inner cover.
" Removing the Front Inner Cover" on page 95
■ Procedure
1. Turn the Dial[2] and then move the Stapler Unit[1] in
about 10cm.
2. Remove the switch assembly [1].
• 2 claws [2]
[1]
3. Remove the switch [1].
• 1 connector [2]
Safety Switch (SW102)
■ Preparation
1. Remove the front cover.
2. Remove the front inner cover.
3. Remove the rear cover.
4. Remove the escape tray.
5. Remove the grate-shaped guide
■ Procedure
1. Remove the switch assembly [1].
[2]
129
4. Parts Replacement and Cleaning
1x
Removing the Swing Guide
" Removing the Front Cover" on page 94
" Removing the Front Inner Cover" on page 95
" Removing the Rear Cover" on page 94
"Removing the Escape Tray" on page 96
"Removing the Grate-shaped Guide" on page 131
• 2 claws [2]
• 2 bosses [3]
[1]
[2]
[1]
[2]
[3]