Removing The Buffer Pass Power Supply Pcb (Pcb203) - Canon Staple Finisher-AA1 Service Manual

1x
9x
[3]
[2]
Removing the Buffer Pass
Power Supply PCB (PCB203)
■ Preparation
1. Remove the Buffer Pass Unit.
"Removing the Buffer Pass Unit" on page 78
■ Procedure
1. Reverse the Buffer Pass Unit.
2. Remove the Buffer Pass Power Supply PCB [1].
• 2 Screws [2]
• 1 Relay Connector [3]
• 1 Reuse band [4]
• 2 Wire Saddles [5]
• 1 Edge Saddle [6]
• 2 Connectors [7]
• 1 Cable Guide [8]
[3]
[1]
[3]
[3]
119
4. Parts Replacement and Cleaning
2x
[5]
[3]
[4]
3. Remove the Buffer Pass Power Supply PCB Cover
[1].
• 4 Screws [2]
• 2 Protrusions [3]
4x
[1]
[2]
4. Removw the Buffer Pass Power Supply PCB [1].
• 4 Screws [2]
• 2 Connectors [3]
6x 2x
[6]
[1]
[2]
[7]
[8]
[2]
[3]