Mounting Color Identification Labels For Et 200S And Et 200S Compact - Siemens SIMATIC ET 200S Operating Instructions Manual

4.11 Mounting Color Identification Labels for ET 200S and ET 200S
COMPACT
Properties
● Color-coded labels allow terminals to be identified in the colors white, red, blue, yellow,
● Color-coded labels can be used at the terminal modules TM-E, TM-P and TM-C of the
● The packaging unit encompasses 200 color-coded labels (10 star-shaped mounts with 20
Introduction
You can provide every terminal at a terminal module with a color-coded label. The color-
coded labels are mounted on the terminal module. Color-coded labels are positioned directly
next to the terminal.
Requirement
The terminal module should not be wired in order to make mounting of the color-coded
labels easier.
Required tools
Screwdriver with 3.5 mm blade
ET 200S
Operating Instructions, 08/2008, A5E00515771-06

4.11 Mounting Color Identification Labels for ET 200S and ET 200S COMPACT

yellow-green, and turquoise.
ET 200S and ET 200S COMPACT.
piece each).
Installing
71