Siemens SIMATIC ET 200S Operating Instructions Manual page 70

Installing
4.10 Applying slot number labels and color identification labels
Applying slot number labels and color identification labels
Applying slot number plates:
1. Break the slot number label (1 to 63) off the strip.
2. Use your finger to press the slot number label onto the terminal module.
Applying color-coding plates:
1. You can place the color identification labels in the opening next to the terminal while they
2. Use your finger to press the color identification labels onto the terminal module.
①
②
Removing slot number labels and color identification labels
Removing slot number plates:
1. Remove the electronic module from the terminal module.
2. Lever the slot number label out of its mount.
Removing color-coding plates:
Use a screwdriver to lever the color-coding plates from their mounts.
70
are still on the strip and then bend the strip back to pull them off.
Figure 4-14 Applying slot number labels and color identification labels
Slot number label
Color identification labels
2
2 2
Operating Instructions, 08/2008, A5E00515771-06
1
2
ET 200S