Siemens SIMATIC ET 200S Operating Instructions Manual page 93

Installing a bus connector
Install the PROFINET connector according to the specifications in the
Guide
Procedure
1. Connecting the supply voltage:
2. Connecting PROFINET:
ET 200S
Operating Instructions, 08/2008, A5E00515771-06
.
– Strip the insulation from the supply voltage wires on the interface module.
– Secure the individual wires in the screw-type terminal.
– Insert the bus connector into the PROFINET connection.
1
3
① 2-port switch (switched hub) for PROFINET
② Labeling strip
③ Supply voltage (1L+, 2L+, 1M, 2M)
2
Wiring and assembly
5.4 Wiring the ET 200S
PROFINET Installation
93