General technical specifications
8.6 Variations in general technical specifications for the ET 200S FC frequency converter
8.6
Variations in general technical specifications for the ET 200S FC
frequency converter
Variations in general technical specifications
The table below shows variations in the general technical specifications for the ET 200S FC
frequency converter compared to the ET 200S.
Table 8- 2
Standards and approvals
Transport and storage conditions
Climatic environmental conditions
Mechanical ambient conditions
Rated voltage for operation
Use in Zone 2
8.7
Use of ET 200S in a zone 2 potentially explosive environments
See product information
136
Variations in general technical specifications for the ET 200S FC frequency converter
Section
Use of subassemblies/modules in a Zone 2 Hazardous Area
Variations
The frequency converter is not approved for
cULus for HAZ.LOC.
•
FM (Factory Mutual Research)
•
Marine
•
Free fall: ≤ 0.35 m
Temperature for horizontal installation:
from 0 to 60 °C
Temperature for vertical installation:
from 0 to 40 °C
See operating instructions for ET 200S FC
Frequency Converter (6SL3298-0CA12-0xP0)
The frequency converter ET 200S FC is not
approved for use in zone 2 potentially explosive
environments.
Operating Instructions, 08/2008, A5E00515771-06
:
ET 200S