Installing And Wiring Et 200S - Siemens SIMATIC ET 200S Operating Instructions Manual

Brief instructions on commissioning ET 200S
2.2 Commissioning on PROFINET IO
Order numbers for the example on PROFINET IO
Quantity
1 × Standard mounting rail 35 mm (length = 483 mm, for example)
1 × IM151-3 PN interface module and terminating module,1 unit
1 × SIMATIC Micro Memory Card (e.g. 64k)
2 × Fast Connect terminal module TM-P15N23-A1, 1 unit
2 × Fast Connect terminal module TM-E15N24-A1, 5 units
2 × PM-E DC24V, 1 piece
1 × 2DI DC24V HF, 5 pieces
1 × 2DO DC24V/0,5A HF, 5 pieces
PROFINET connector (according to the specifications in the
Installation Guide
Appropriate installation cables:
• FC Standard Cable
• FC Trailing Cable
• FC Marine Cable
2.2.2

Installing and wiring ET 200S

Installing the DIN rail
1. Install the DIN rail (35 x 7.5 mm or 15 mm, length = at least 210 mm) on a solid surface.
2. Start from the left with the installation of the individual modules on the DIN rail
32
Ordering data
)
(hook in - swivel in - slide to left). Follow the following sequence:
– Interface module IM151-3 PN
– TM-P15N23-A1 terminal module
– 4 x TM-E15N24-A1 terminal module
– TM-P15N23-A1 terminal module
– 4 x TM-E15N24-A1 terminal module
– Terminating module
6ES5710-8MA11
6ES7151-3AA20-0AB0
6ES7953-8LF11-0AA0
6ES7193-4CC70-0AA0
6ES7193-4CA70-0AA0
6ES7138-4CA01-0AA0
6ES7131-4BB01-0AB0
6ES7132-4BB01-0AB0
PROFINET
6XV1 840-2AH10
6XV1 840-3AH10
6XV1 840-4AH10
Operating Instructions, 08/2008, A5E00515771-06
Order number
ET 200S