4.4
Installing the terminal modules TM-C for COMPACT modules
Introduction
● The terminal modules serve to receive COMPACT modules.
● The terminal modules can be prewired (without COMPACT modules).
● All other terminal modules are installed to the right of the terminal module for COMPACT
Requirements
● The mounting rail is installed.
Required tools
Screwdriver with 3 mm blade
Mounting a terminal module for COMPACT modules
1. Insert the terminal module for COMPACT modules in the mounting rail (on the left side).
2. Move terminal module backward until the slider can be heard locking in place.
ET 200S
Operating Instructions, 08/2008, A5E00515771-06
modules.
Figure 4-5
Mounting a terminal module for COMPACT modules
4.4 Installing the terminal modules TM-C for COMPACT modules
Installing
57