Wiring
5.11 Labeling ET 200SP
● The labeling strips can be inserted in the CPU/interface module, I/O module and BU
cover and allow identification of the ET 200SP distributed I/O system. The labeling strips
can be ordered on a roll for thermal transfer printers or as DIN A4 format sheets for laser
printers.
①
②
③
Figure 5-31
5.11.3
Applying color identification labels
Requirements
The BaseUnits must not be wired when you apply the color identification labels.
Required tools
3 mm screwdriver (only for removing the color identification labels)
94
Reference identification labels
Labeling strips
Color identification labels
Optional markings
Distributed I/O system
System Manual, 12/2015, A5E03576849-AF