Table of Contents
Advertisement
Installation
Requirements
• The terminal modules are installed.
• You can only fit the slot number labels when no electronics modules are
installed.
• You can only fit the color identification labels when the terminal modules are still
unwired.
• The slot number labels and the color identification labels are fitted to the
terminal modules.
Position of the slot number labels: Below the right coding element on the
–
terminal module.
Position of the color identification labels: Directly beside each terminal on the
–
terminal box.
Required Tools
Screwdriver with 3 mm blade (only for removal)
Fitting Slot Number Labels and Color Identification Labels
Table 5-2
Fitting Slot Number Labels and Color Identification Labels
Step
Slot Number Labels
1
Break the slot number label (1 to 32) out
of the strip.
2
Using a finger, press the slot number
label into the terminal module.
5-14
Color Identification Labels
You can insert the colour identification labels
directly from the strip into the opening beside the
terminal and twist off the label.
Using a finger, press the color identification label
into the terminal module.
ET 200iS Distributed I/O Station
A5E00087831-02
Advertisement
Table of Contents
