Siemens SIMATIC ET 200S Operating Instructions Manual page 17

Terminal module for
COMPACT modules
Terminal module for
power and electronic
modules
Add-on terminal for
•
•
Power module
ET 200S
Operating Instructions, 08/2008, A5E00515771-06
Components
... ...carries the wiring and
accommodates COMPACT modules.
Terminal modules for COMPACT
modules are available in the following
versions:
•
•
... ...provides the electrical and
mechanical connection to the ET
200S module.
Terminal modules versions available:
•
•
•
•
•
... ...extends the terminal block and
enables the connection of sensors /
Terminal module for
actuators for the individual channels
COMPACT modules
in 3 or 4 conductor technology
Any terminal modules
Additional terminals are available in
with a width of 120
the following variants:
mm
•
•
... Monitors the voltage for all the
electronic modules in the potential
group. The following power modules
are available:
•
•
•
1.3 What is the ET 200S distributed I/O system?
Function
With screw-type terminal
With spring-loaded terminal
For power modules
For electronic modules
With screw-type terminal
With spring-loaded terminal
With Fast Connect (quick
connection method, no stripping
required)
With screw-type terminal
With spring-loaded terminal
For a 24 VDC supply with
diagnostics
For a 24 to 48 VDC supply with
diagnostics
For a 24 to 48 VDC, 24 to
230 VAC supply with diagnostics
and fuse
Description
View
17