Siemens SIMATIC ET 200S Operating Instructions Manual page 5

Guide
The operating instructions contain the following guides which provide quick access to the
specific information you need:
● You will find a table of contents and a list of tables and figures in the document at the
● The chapters contain subheadings that provide an overview of the content of the section.
● Following the appendix, you will find a glossary in which important technical terms used in
● At the end of the operating instructions, there is a comprehensive index enabling rapid
Other manuals
In addition to these operating instructions, you also need the manual for your DP master or
PROFINET IO Controller and the manuals for the modules you are using.
Recycling and disposal
Thanks to the fact that it is low in contaminants, the ET 200S is recyclable. For
environmentally compliant recycling and disposal of your electronic waste, please contact a
company certified for the disposal of electronic waste.
Information on the Internet
You can find information on the Internet on the following topics:
● Contacts (http://www.siemens.com/automation/partner) for SIMATIC
● Contacts for SIMATIC NET (http://www.siemens.com/simatic-net)
● Training (http://www.sitrain.com)
See also
Order numbers for ET 200S network components (Page 138)
Technical Support, Contacts and
Training (http://support.automation.siemens.com/WW/view/en/19293011)
ET 200S
Operating Instructions, 08/2008, A5E00515771-06
beginning of the operating instructions.
the operating instructions are defined.
access to the information you are looking for.
Preface
5