Et 200Pro Fc-2 Frequency Converter In The Industrial Environment - Siemens SIMATIC ET 200pro Original Instructions Manual

EMC impact
Electromagnetic high
frequency field
Amplitude modulated
Transient overvoltages
Voltage surge
1.2/50 μs
Wired
High frequency common
mode
System interruptions and
voltage dips
Voltage distortion
Voltage asymmetry
Frequency fluctuation
Commutation notches
12.5.4

ET 200pro FC-2 frequency converter in the industrial environment

ET 200pro FC-2 frequency converters with integrated Class A EMC filters are designed for
use in an industrial environment, provided that the permissible cable lengths are used.
Table 12- 5
Field of application
Industry
Installation guidelines for ET 200pro FC-2 frequency converters with integrated EMC filter
● Operation is only permitted for TN line supply systems.
● The converter must be assembled on a grounded plate with a large surface.
● The module rack is to be grounded.
● The maximum length per frequency converter of the shielded power cable is 15 m.
SIMATIC ET 200pro FC-2 converter
Operating Instructions, 04/2015, FW V4.7.3, A5E34257324B AB
Standard
EN 61000-4-3
EN 61000-4-4
EN 61000-4-5
EN 61000-4-6
EN 61000-2-1
EN 61000-2-4
Class 3
EN 61000-2-4
Class 3
EN 61000-2-4
Class 3
EN 60146-1-1
Class B
Use in the industrial environment
Emitted noise
EN 61000-6-4, with Class A filter
12.5 Electromagnetic compatibility of the converters
Step
0.15 MHz ... 80 MHz 10 V/m
80 % AM at 1 kHz
2 kV at 5 kHz
1 kV inverse mode (L-L)
2 kV common mode (L-E)
0.15 MHz ... 80 MHz 10 V/rms
80 % AM at 1 kHz
100 % voltage dip for 3 ms
30 % voltage dip for 10 ms
60 % voltage dip for 100 ms
95 % voltage dip for 5000 ms
10 % THD
3 % inverse reactance
Rated value 50 Hz or 60 Hz (± 4 %)
Depth = 40 %
Area = 250 % x degrees
Requirement relating to
Technical data
Power crite-
rion
A
A
A
A
C
B
C
C
A
A
A
A
Interference immunity
EN 61000-6-2
225