Custom Factory Configuration
The following table lists the parameters you can use to configure the custom factory.
Parameter
Description
Permitted Values
Default
Parameter
Description
Permitted Values
Default
Web UI
Deleting the Custom Factory Settings Files
You can delete the user-defined factory configurations via the web user interface.
Procedure
1. From the web user interface, click Settings > Configuration > Factory Configuration.
2. Click Delete from the Delete Factory Configuration field.
The web user interface prompts the message "Are you sure delete user-defined factory configuration?".
3. Click OK to delete the custom factory configuration files.
The imported custom factory file will be deleted. The device will be reset to default factory settings after
resetting.
Device Reboot
You can reboot the device locally.
•
Rebooting the Device via Phone User Interface
•
Rebooting the Device via Web User Interface
Rebooting the Device via Phone User Interface
Procedure
1. Navigate to
> Settings > Device Settings > Debug.
2. Select Reboot phone.
It prompts if you are sure to reboot the device.
static.features.custom_factory_config.enable
It enables or disables the Custom Factory Configuration feature.
0-Disabled
1-Enabled, Import Factory Configuration item will be displayed on the device's
web user interface at the path Settings > Configuration. You can import a custom
factory configuration file or delete the user-defined factory configuration via web
user interface.
0
static.custom_factory_configuration.url
It configures the access URL of the custom factory configuration files.
Note: It works only if "static.features.custom_factory_config.enable" is set to 1
(Enabled) and the file format of the custom factory configuration file must be *.bin.
URL within 511 characters
Blank
Settings > Configuration > Import Factory Configuration
| Troubleshooting Methods | 111
<y0000000000xx>.cfg
<y0000000000xx>.cfg