Activating the Wi-Fi Mode via the phone user interface
3. Tap the Menu > Basic > Wi-Fi
4. Press
or
, or the Switch soft key to select On from the Wi-Fi field.
5. Press the Save soft key
The IP phone scans the available wireless networks in your area
Connecting to the Wireless Network
There are 3 ways to connect to the wireless network
•
Manually connect to an available wireless network
•
Wi-Fi Protected Setup (WPS)
•
Manually add a wireless network
Manually Connect to an Available Wireless Network
To manually connect to a wireless network via phone user interface:
1. Press Menu > Basic > Wi-Fi
2. Press
o r
to highlight X Available Network(s) (X represents the number of available networks),
and then press the Enter soft key.
3. If there is no available wireless network, press the Scan soft key to search for the wireless network
again.
4. Press
or
to select the desired wireless network
Optus Loop – Wireless Settings Yealink T46S QRG
Yealink T46S Wireless Settings
2