Rider Information Display - Polaris 2014 Sportsman 570 EF Service Manual

Rider Information Display

The rider information display is located in the instrument cluster. All segments will light up for 1 second at start-up.
NOTE: If the instrument cluster fails to illuminate, a battery over-voltage may have occurred and the
instrument cluster may have shut off to protect the electronic speedometer.
The reverse override button on the LH control acts as the MODE button when pressed and released quickly. The
transmission cannot be in reverse when using the override button as a MODE button.
1. Vehicle Speed Display - Analog display of vehicle speed in MPH or km/h.
2. Information Display Area - Odometer / Trip Meter / Tachometer / Engine Hours / Service Info / Clock - LCD
display of the service hour interval, total vehicle miles or km., total engine hours, trip meters and engine RPM.
3. MPH / KM/H Display - MPH is displayed when the instrument cluster is in the Standard mode. KM/H is displayed
when the instrument cluster is in the Metric mode.
4. High Beam Indicator LED icon illuminates whenever the LH control headlamp switch is in the high beam position.
5. Fuel Level Indicator - LCD bar graph indicating current fuel level. All segments will flash when the last segment is
cleared indicating a low fuel warning.
6. Clock - Displays current time in either 12-hour or 24-hour formats.
7. Engine Temperature Indicator - LED icon illuminates when the ECM determines the engine is overheating. The
indicators will initially flash to indicate the engine is overheating. The indicators will stay lit and not flash if a severe
overheating condition exists.
8. Service Interval Indicator - Preset at the factory and adjustable by the user, a flashing wrench symbol alerts the
operator that the preset service interval has been reached and maintenance should be performed. The wrench
icon will flash for 10 seconds upon start-up once it reaches 0.
9. Check Engine MIL - Illuminated when the ECM has detected a Diagnostic Trouble Code in the engine
management system.
10. AWD Indicator - Illuminated when the RH control switch is in either 4x4 or ADC 4x4 position.
11. TURF Indicator - Illuminated when the RH control switch is in the TURF position (X2 Models Only).
12. Neutral Gear Indicator - LED icon illuminates when gear selector is in the neutral (N) position.
13. Gear Position Indicator - Displays gear selector position.
H = High
L = Low
N = Neutral
R = Reverse
P = Park
– = Gear Signal Error (shifter stuck between gears)
14. Power Steering System MIL - LED icon illuminates when a fault has occurred with the power steering system.
This indicator illuminates when the key is turned to the ON position and goes off when the engine is started.
15. Turn Signal / Hazard Lamp Indicator - LED icon illuminates whenever the LH, RH or hazard lamps are activated
(International Models Only).
16. Active Descent Control Indicator - Illuminated when the RH control switch is in the ADC 4x4 position and ADC is
active.
9924871 R03 - 2014 Polaris Sportsman® 570 EFI Service Manual
© Copyright 2013 Polaris Sales Inc.
ELECTRICAL
10
10.7