ENGINE
Starter One-Way Clutch Installation
1. Install one-way clutch in clutch hub with flange of
clutch (F) engaged in recess.
NOTE: The one-way clutch can be installed into
the hub incorrectly. This will cause engine
cranking issues.
2. Clean screw threads in flywheel to remove all oil or
grease.
3. Apply Loctite® 272™ on the (3) bolts. Place hub on
flywheel and install (3) bolts.
4. Torque screws to specification.
One Way Clutch Retaining Bolts:
9 ft-lbs (12 Nm)
Apply Loctite® 272™
3.70
Flywheel Installation
1. Clean the threads, taper and flat of crankshaft to
2. Clean flywheel taper to remove all oil or grease.
3. Apply a small amount of PS4 engine oil to the flat
4. Rotate crankshaft so the flywheel key (2) is facing
9924871 R03 - 2014 Polaris Sportsman® 570 EFI Service Manual
© Copyright 2013 Polaris Sales Inc.
remove all oil or grease.
area (1) on the MAG side crankshaft. DO NOT apply
engine oil to the crankshaft taper.
upward.