Snorkel / Output Gear Backlash Procedure - Polaris 2014 Sportsman 570 EF Service Manual

TRANSMISSION

Snorkel / Output Gear Backlash Procedure

1. Reassemble the snorkel shaft assembly by reversing
the disassembly procedure (see "Transmission
Snorkel Shaft Removal / Disassembly" in previous
section).
2. Apply a small amount of white lithium grease on the
threads of the snorkel tube.
8.16
3. Install the snorkel shaft into the gearcase. Using the
4. Inspect the output gear assembly and replace
5. Install the output gear assembly. Be sure to properly
9924871 R03 - 2014 Polaris Sportsman® 570 EFI Service Manual
© Copyright 2013 Polaris Sales Inc.
Snorkel Tool (PA-50231), tighten the snorkel tube
about 10 full rotations. Do not completely tighten
the snorkel tube.
bearings if needed. Inspect each gear for damage,
chips or abnormal worn teeth.
mesh the snorkel shaft bevel gear with the output
bevel gear.