FINAL DRIVE
Assembly
1. Support bottom of bearing carrier housing.
2. Start bearing in housing.
7.22
3. Press bearing into place until outer race bottoms on
4. Install snap ring into groove.
Installation
1. Insert bearing carrier on drive shaft.
2. Align bottom of carrier housing and lower control
9924871 R03 - 2014 Polaris Sportsman® 570 EFI Service Manual
© Copyright 2013 Polaris Sales Inc.
housing.
CAUTION
Use an arbor press only on the outer race
to avoid bearing damage.
arm. Grease and slide lower control arm bushings
into place, securing corner housing.