Digital Wrench Communication Errors; Digital Wrench - Diagnostic Connector; Digital Wrench Serial Number Location - Polaris 2014 Sportsman 570 EF Service Manual

FUEL SYSTEM - GENERAL

Digital Wrench Communication Errors

If you experience problems connecting to a vehicle or
any Digital Wrench related problem, visit the Digital
Wrench Knowledge Base
troubleshooting information, FAQs, downloads and
software updates at: http://polaris.diagsys.com/.
4.40
for the most current
9924871 R03 - 2014 Polaris Sportsman® 570 EFI Service Manual
© Copyright 2013 Polaris Sales Inc.

Digital Wrench - Diagnostic Connector

Located under the front rack; connected to a sealed plug.
Follow these steps to connect the diagnostic interface
cable to the vehicle to allow Digital Wrench use:
1. Assemble the SmartLink Module and attach the PC
Interface Cable to your laptop (see page 4.3).
2. Remove the protective cap from the Digital Wrench
connector.
3. Connect the Vehicle Interface Cable to the Digital
Wrench diagnostic connector.
4. Turn the ignition key to the 'ON' position, select the
appropriate vehicle and wait for the status to display
'Connected' in the lower left corner of the screen.
5. Once connected, proceed with using Digital Wrench.

Digital Wrench Serial Number Location

Open the configuration screen by clicking on the wrench
icon. The serial number is located on the right side of the
screen.