Inner Plunging Joint / Boot Replacement - Polaris 2014 Sportsman 570 EF Service Manual

FINAL DRIVE

Inner Plunging Joint / Boot Replacement

1. Using a side cutters, cut away and discard the boot
clamps.
2. Remove the large end of the boot from the plunging
joint and slide the boot down the shaft.
3. Clean the grease from the face of the joint.
4. Place the drive shaft in a soft-jawed vise.
7.30
5. Using a soft-faced hammer, or brass drift, strike the
6. Make sure the circlip is still on the shaft and not left
9924871 R03 - 2014 Polaris Sportsman® 570 EFI Service Manual
© Copyright 2013 Polaris Sales Inc.
inner race of the joint to drive the joint off the drive
shaft. Be sure to tap evenly around the joint to avoid
binding.
NOTE: Tap on inner race only!
in the joint.