Polaris 2014 Sportsman 570 EF Service Manual page 276

CLUTCHING
5. Install the roller pin into the sheave assembly on both
sides. The flat side of the roller pin faces downward
when the shaft side is laying flat on the bench.
6. Install the spring pins (C) to secure the roller pins.
Install until flush with sheave surface.
7. Install the spring over the shaft.
8. Install the clutch rollers (D) onto each side of the
outside spider. Install the washers (E) and E-clips (F)
to secure the rollers. The rollers should spin freely.
6.42
9. Install the spider dampener (G) inside the outer
10. Install the spider assembly onto the shaft with the
11. Place the driven clutch into the Universal Clutch
9924871 R03 - 2014 Polaris Sportsman® 570 EFI Service Manual
© Copyright 2013 Polaris Sales Inc.
spider and install the inside spider plate (H).
retaining ring on top of the spider. NOTE: Use the
marks previously made to align the skip tooth spider,
or use the "X" on top of the spider and align it with
the skip tooth on the shaft.
Compressor PU-50518.