Installation - Polaris 2014 Sportsman 570 EF Service Manual

BRAKES
4. Compress the mounting bracket and make sure the
dust seals are fully seated. Install the brake pads.
Clean the disc and pads with brake parts cleaner or
denatured alcohol to remove any dirt, oil or grease.

Installation

1. Install caliper on hub strut, and torque mounting bolts
to specification.
Brake Caliper Mounting Bolt:
18 ft-lbs (24 Nm)
9.22
2. Install brake line and torque the banjo bolt to
3. Install the adjuster screw and turn until stationary
4. Perform brake bleeding procedure as outlined earlier
5. Install wheels and torque wheel nuts to specification.
9924871 R03 - 2014 Polaris Sportsman® 570 EFI Service Manual
© Copyright 2013 Polaris Sales Inc.
specification.
Brake Line Banjo Bolt:
15 ft-lbs (21 Nm)
pad contacts disc, then back off 1/2 turn.
in this chapter.
Refer to Chapter 2.