Polaris 2014 Sportsman 570 EF Service Manual page 93

11. Torque the fasteners that attach the front engine
mounts isolators to specification.
Front engine mount
Isolators:
23 ft-lbs ± 10% (50 Nm ± 10%)
12. Remove the clutch center-to-center tool.
NOTE: The clutch center to center alignment
tool should not have pressure on it at this time.
If pressure is observed, adjust as necessary.
13. Install front prop shaft.(See PROP SHAFT - FRONT
OR REAR, page 7.34)
14. Reposition the head pipe assembly in the chassis
and install new exhaust seals . Install the head pipe
bolts and torque to specification.(if removed)
Exhaust Head Pipe Bolts:
18 ft-lbs (24.5 Nm)
15. Install the springs securing the muffler to the head
pipe.
16. Install the coolant hoses onto the engine.
17. Install the throttle body and air box. Tighten the hose
clamps(see 2 and 6 before step 21) that secure the
throttle body to the intake duct, intake boot and air
box.
18. Install the lower stater motor bolt through the lower
starter motor mounting boss.
19. Instal the starter motor onto the engine.
20. Install the starter motor and battery cables as
outlined in Chapter 10.
Starter Motor Fastener:
7 ft-lbs (10 Nm)
9924871 R03 - 2014 Polaris Sportsman® 570 EFI Service Manual
© Copyright 2013 Polaris Sales Inc.
ENGINE
3
3.35