Crankcase Breather Valve / Hose - Polaris 2014 Sportsman 570 EF Service Manual

11. Torque sprocket bolts to specification.
Oil Pump Sprocket Bolt:
9 ft-lbs (12 Nm)
Oil Capacity:
Approx. 2 Quarts (1.9 L)
Oil Filter Wrench:
PU-50105 or 2.5" (64 mm)
Oil Type:
Polaris PS-4
Synthetic Engine Oil
Oil Pressure
Minimum Specification:
(using Polaris PS-4 Plus at operating temperature)
10 PSI @ 1200 RPM(Minimum)
40 PSI @ 7000 RPM(Minimum)
12. Prepare Inter (mag) and mag side crank case by
clean all mating surfaces.
13. Apply a thin film of Crankcase Sealant (PN 2871557)
evenly to a clean and oil-free MAG crankcase mating
surface.
14. Install the inter (mag) crankcase bolts finger tight in
MAG side crankcase.
15. Tighten all bolts evenly until snug.
9924871 R03 - 2014 Polaris Sportsman® 570 EFI Service Manual
16. Torque the new crankcase bolts to in sequence to
specification.

Crankcase Breather Valve / Hose

The breather valve is on the hose that runs between the
engine and air box. Be sure breather line is routed prop-
erly and secured in place.
1. Remove the left side panel
2. Remove the hose clamps from the valve and pull the
valve out of the hoses.
© Copyright 2013 Polaris Sales Inc.
Crankcase Bolts (In Sequence):
12 ft-lbs (2 Nm)
ENGINE
3
3.75