Polaris 2014 Sportsman 570 EF Service Manual page 352

BRAKES
10. Repeat procedure Steps 5-9 for the remaining
caliper(s).
11. Add Polaris DOT-approved Brake Fluid to MAX level
inside reservoir.
12. Install diaphragm, sight glass, cap and screws.
9.8
13. Wiggle and press down on the cap to be sure it fits
14. Torque the screw to specification .
15. Field test machine at low speed before putting into
16. Check brake system for fluid leaks and inspect all
9924871 R03 - 2014 Polaris Sportsman® 570 EFI Service Manual
© Copyright 2013 Polaris Sales Inc.
evenly and snug.
Master Cylinder Cover Screw:
7 in-lbs (0.79 Nm)
service. Check for proper braking action and lever
reserve. With lever firmly applied, lever reserve
should be no less than 1/2", (1.3 cm) from handlebar.
hoses and lines for wear or abrasion. Replace hose if
wear or abrasion is found.