Prop Shaft - Front Or Rear; Removal And Installation - Polaris 2014 Sportsman 570 EF Service Manual

FINAL DRIVE

PROP SHAFT - FRONT OR REAR

Removal and Installation

1. Using Roll Pin Removal Tool (PN 2872608), remove the roll pin from prop shaft at rear of housing (front only) or
transmission output shaft (rear only). Slide prop shaft back and away from housing, then pull sharply forward to
remove from transmission shaft.
2. For installation, reverse the removal procedure.
NOTE: If removing rear propshaft, loosening and/or removal of rear gearcase mounting bolts may be
required to gain necessary clearance for propshaft removal.
7.34
9924871 R03 - 2014 Polaris Sportsman® 570 EFI Service Manual
© Copyright 2013 Polaris Sales Inc.