Polaris 2014 Sportsman 570 EF Service Manual page 162

FUEL SYSTEM - GENERAL
7. Place the Fuel Pump Service Tool (PU-50326) over
the fuel pump PFA nut. Using a 1/2" drive ratchet or
breaker bar, loosen and remove the PFA nut.
Discard the PFA nut.
NOTE: Apply downward force on the fuel pump
flange while removing the fuel pump PFA nut.
4.16
8. Carefully lift the fuel pump out of the fuel tank. As the
9. Transfer old fuel pump to a suitable container
10. Inspect the inside of the fuel tank for debris (may
11. Remove new fuel pump assembly, gasket and PFA
9924871 R03 - 2014 Polaris Sportsman® 570 EFI Service Manual
© Copyright 2013 Polaris Sales Inc.
fuel pump assembly is being removed, be aware of
float arm and pump pre-filter. Hold the float arm to
the pump body as you lift and tilt the pump to ensure
that the float arm is not bent when removed from the
tank.
capable of safely holding fuel. The fuel pump will
retain some fuel.
require flashlight and mirror). If debris like mud or
sand is present, fuel tank should be flushed and
cleaned out prior to installation of new fuel pump
assembly.
NOTE: It is recommended to remove the fuel
tank from the vehicle and rinse it with a small
amount of clean fuel. Do not use water or any
other chemicals to remove debris.
nut from packaging. Use care not to bend float arm
during un-packaging. Do not lift or carry fuel pump
assembly by the float arm.