FINAL DRIVE
Drive Shaft Exploded Views
FRONT SHAFT
REAR SHAFT
7.46
Spring Ring
Plunging
Joint
Gear Side
Boot Kit
Wheel Side
Boot Kit
CV Joint
Spring Ring
Plunging
Joint
Gear Side
Boot Kit
Wheel Side
Boot Kit
CV Joint
9923412 - 2012 Sportsman 400/500 and EFI Tractor Service Manual
© Copyright 2011 Polaris Sales Inc.
PROP SHAFT - FRONT OR REAR
Removal and Installation
1. Using Roll Pin Removal Tool (PN 2872608), remove
the roll pin from prop shaft at rear of housing (front
only) or transmission output shaft (rear only). Slide
prop shaft back and away from housing, then pull
sharply forward to remove from transmission shaft.
2. For installation, reverse the removal procedure.
NOTE: If removing rear propshaft, loosening and/or
removal of rear gearcase mounting bolts may be
required to gain necessary clearance for propshaft
removal.