User' - 'Date And Time' Menu - ProMinent Splash Control Pro 2 Assembly And Operating Instructions Manual

'USER' programming screen

'User' - 'Date and time' menu

9.3
Change of date and time parameters
6
Fig. 119: Menu: Date and time
110
1 2
Friday
Automatic time adjustment
5 4
'Date and time' menu lets you access the configuration of
The
date and time parameters.
1. Press the clock (6) to change the time.
2. Press the clock (1) to switch between 12 and 24-hour display
mode.
3. Press the calendar (2) to change the date.
4. Press the date (3) to change the display mode to mm/yy.
5. Press the map (4) to change the time zone.
Scroll up or down the list by pressing and holding down the
key until your required zone is in the centre of the selection.
Wait until the display closes automatically to save the new
time zone.
6. If your selected time zone has a summer/winter time control,
then your device will change the time automatically. You can
cancel this automatic time change by unchecking this box
(5).
September 2020
3
A3051