Reconfiguring the Column Outlet
The following suggested column installation procedure is based on the column
label facing the user and positioned approximately at the top (12 o'clock position)
of the column cage holder. With this configuration the inlet and outlet ends of the
column remain the same as when a GC detector is used, and the column outlet is
positioned at the back (closer to the fan) of the column cage holder.
1 Lay the column on a clean surface with the column label facing the user in
the 12 o'clock position.
pd¤hmmdF
GQ¬ pd¤hm¤
pd¤hm¤dF
3 Operational Differences
Reconfiguring the Column Outlet
63