Customer Responsibilities - Agilent Technologies G2570A GC/MSD Installation And Operation Differences

Customer Responsibilities

The customer should ensure that the installation site is prepared in accordance
with the specifications contained in the following documents:
• 5973Network MSD Site Preparation Manual (Part No. G2589-90010)
• Site Prep Summary as part of the 6850A User Information Manual
(Part No. G2630-90220)
• G2570A GC/MSD System Site Preparation Addendum (Part No. G2589-90040)
A customer representative should be present at all times during the installation.
The G2570A GC/MSD System is shipped in the following boxes:
• 6850A GC - MSD-Ready
• 6850A Control Module
• 5973Network MSD
• Rough pump for MSD
• PC hardware.
Unpack and verify the contents of each container in the presence of an Agilent
Technologies representative.
Check serial numbers and fill in installation documentation S/N fields if necessary.
Description
–GQ¬ ˜ pm›pd˜p=¤dF
–GQ¬ ˜ "’˜ ^ph"›pV"z^
Qn•˜ aOO¤’apm˜¤hz
•–G˜ ˜p§F˜|"44F’’p©}
pm˜ "¤VF˜ pm›pddF˜|"44F’’p©}
• Check voltage settings of the instruments and computer systems.
• Verify that power cables are correct (must mate with power receptacles).
• Verify line voltage is correct and the correct line voltage is delivered.
2 Hardware Installation (Differences)
Serial Number
Customer Responsibilities
13