Agilent Technologies G2570A GC/MSD Installation And Operation Differences page 24

2 Hardware Installation (Differences)
Reconfiguring the Column Outlet
5 Next, feed the outlet side of the column through the 3 o'clock positioned
clip so that the column outlet is pointing toward the back of the column
cage. Assure that the part of the column that is between the two clips does
NOT extend above the column label.
C A U T I O N
|s pŒ4dp4c˜zp’a›apm}
| pŒ4dp4c˜zp’a›apm}
p˜ pd¤hm˜¤dF›˜
|"› dF"’›˜Q¬˜4h}
There must be at least 50 cm of column between the 3 o'clock positioned clip and
the outlet.
6 Carefully rewind the remainder of the column outlet around the column
cage.
24
F˜4"FO¤d˜mp›˜›p˜’4"›4^˜›^F˜4pd¤hm˜4p"›amV
pd¤hm˜ daz
pd¤hm˜ daz