5 Next, feed the outlet side of the column through the 3 o'clock positioned
clip so that the column outlet is pointing toward the back of the column
cage. Make sure that the loop height does NOT extend above the column
label.
C A U T I O N
|s p4dp4czpaapm}
| p4dp4czpaapm}
p pd¤hm¤dF
|" dF"Q¬4h}
There must be at least 50 cm. of column after it passes through the 3 o'clock
positioned clip.
6 Carefully rewind the remainder of the column outlet around the column
cage.
F4"FO¤dmpp4"4^^F4pd¤hm4p"amV
pd¤hm daz
pd¤hm daz
3 Operational Differences
Reconfiguring the Column Outlet
67