Connecting The Msd And The Gc - Agilent Technologies G2570A GC/MSD Installation And Operation Differences

2 Hardware Installation (Differences)

Connecting the MSD and the GC

Connecting the MSD and the GC
1 Verify that the GC power is turned off.
2 Install the GC/MS Interstitial Panel (Part No. G2589-00031) onto the mid-
support and front-support legs of the right side of the MSD. Use three
M4 torque 15 screws.
— ˜ m›F’›a›a"d˜
"mFd
32