Agilent Technologies G2570A GC/MSD Installation And Operation Differences page 51

o
ChemStation Hardware Installation
o PC, monitor, and printer unpacked
o PC installed
o Network hub unpacked and plugged in
o LAN cable from the MSD connected to hub port #2
o LAN cable from the PC connected to hub port #3
o Printer installed
o Modem installed (if supplied)
o Modem, printer, monitor, and PC turned on (in that order)
o
MSD Productivity Software Installation
(See G1701CA Software Installation Manual)
o Windows NT 4.0 operating system prerequisites verified
o Service Pack 4 installed
o Modem configured with Carbon Copy (optional)
o TCP/IP installation/configuration verified
o HP I/O Libraries installed
o HP I/O Libraries configured for LAN Client
o CAG Bootp server installed from MSD ChemStation software CD
o Bootp entry added for MSD instrument (not for GC)
o MS IP address can be recognized by Bootp server
o SICL drivers installed from the MSD ChemStation software CD
o SICL drivers configured
o MSD ChemStation software installed
o MSD IP address set from MSD ChemStation Configuration program (do not
configure nor include a GC)
o Firmware drivers downloaded to the LAN/MS Control card
2 Hardware Installation (Differences)
Installation Checklist
51