Festo CPX-F8DE-P Manual page 16

Contents and general instructions
XIV
Only properly trained and certified technicians are permit­
•
ted to install this equipment.
To maintain the IP protection class:
Screw the connection block on tight è Chapter 2.3
•
Install cable tips and seals professionally
•
Seal unused connections with cover caps.
•
Technical requirements
General technical requirements for correct and safe use of the
product:
Comply with all limits of the product defined by the tech­
•
nical data è Appendix A.1.
Only then is operation of the product in accordance with
the relevant safety regulations ensured.
When connecting standard auxiliary components, also
•
observe the specified limit values for electrical connection
values and environmental conditions.
Festo P.BE-CPX-F8DE-P-E N en 1610a English