Festo CPX-F8DE-P Manual page 11

Contents and general instructions
Manifold block
CPX­M­AB­4­M12X2­5POL­T
CPX­M­AB­4­M12X2­5POL
CPX­AB­8­KL­4POL
CPX­AB­ID­P
Tab. 0/2: Permitted connection blocks
Festo P.BE-CPX-F8DE-P-E N en 1610a English
Operation of the CPX-F8DE-P is only possible with the follow­
ing manifold blocks:
Application examples
Connection of OSSD­sensors with a current consumption of up to 0.7 A
– Power supply via contacts T0, T2, T4, T6
Connection of sensors for mechanical switch contacts
– Clock signals via contacts T0 ... T7
Connection of OSSD­sensors with a current consumption of up to 2 A
Connection of sensors via terminal strip
Setting of a coded identifier using an 8x DIL switch
– It is not possible to connect sensors
Further information about the supported product variants of
CPX can be found in Chapter 1.1.3.
IX