Rules For Product Configuration - Festo CPX-F8DE-P Manual

Contents and general instructions

Rules for product configuration

VIII
Note
Observe that the safety engineering system limits of the
•
output module are also its physical limits.
Responsibility for use of the input module in a safety func­
tion is a matter for the user.
Operation of the output module CPX-F8DE-P is permissible
only in CPX terminals from Festo of the variant .
Operation of the CPX-F8DE-P is permissible only in combina­
tion with the following PROFIsafe-capable CPX bus nodes
(bus node rating plate):
bus node
1)
CPX-FB13
2)
CPX-FB33
2)
CPX-M-FB34
2)
CPX-M-FB35
è Description
1)
P.BE-CPX-FB13...
è Description
2)
P.BE-CPX-PNIO...
Tab. 0/1: Permissible PROFIsafe-capable CPX bus nodess
Only use for manifold blocks in implemented in metal –
•
e. g. B. CPX-M-GE-EV è Chapter 1.1.2.
Comply with all technical data è Appendix A.1.
•
Otherwise, operative malfunctions can occur.
from Revision Network protocol
30 PROFIBUS
21 PROFINET IO
21 PROFINET IO
21 PROFINET IO
Festo P.BE-CPX-F8DE-P-E N en 1610a English