Festo CPX-F8DE-P Manual page 21

Contents and general instructions
Product label (example)
1
7
6
1)
Part number of the electronic module CPX-F8DE-P.
2)
The serial number enables the product to be traced.
è
3)
Tab. 0/6 and Tab. 0/7
Tab. 0/5: Product description of the electronic module CPX-F8DE-P
Festo P.BE-CPX-F8DE-P-E N en 1610a English
The product label of the electronic module CPX-F8DE-P shows
the following information:
Function
– Product designation 1
2
– Part number 2
– Revision code (here R01) 3
– Serial number represented as data matrix code 4
3
– Manufacturer and manufacturer's address 5
– 14-character serial number 6
4
– Manufacturing period (encrypted) 7
(here E5 = May 2014)
5
You will find further information about this in the system
description P.BE-CPX-SYS-...
Revision status
Determining the revision status of a CPX module:
•
– with the operating device CPX-MMI-1
è [Module data] [Revision]
– with the appropriate configuration software
è Module data, revision code
– from the product label of the relevant module (in dis­
mantled condition, è Tab. 0/5).
Prior to replacement of a module, check to see if the revi­
•
sion code on the bus node complies with the require­
ments of the module è Tab. 0/1.
1)
2)
3)
2)
XIX